language Engleza
EURO
0 item(s) - €0
Four Flute End Mill, Pitch 35 degrees / 38 degrees
  • Four Flute End Mill, Pitch 35 degrees / 38 degrees
  • Four Flute End Mill, Pitch 35 degrees / 38 degrees

Four Flute End Mill, Pitch 35 degrees / 38 degrees

Datron

0 Review(s)

from 30.46 EURO without VAT

4 DintiAlamaCupruInox

Micrograin solid carbide end mill
With four flutes
35 ° /38 ° upcut spiral
Shank with clamping surface DIN 6535-HB
Centre cut with two long front side flutes

Due to its different helical pitch, this milling tool runs extremely smoothly and chips are removed very quickly. As standard these tools are supplied with an Alcrona coating.

Legend
D1 = Flute Diameter, D2= Shank Diameter, D3= Toric Cut, L1= Total Length, L2= Flute Length, L3= Useable Length, α= Angle, R= Radius, W/R, A/R= Angle/Radius, F= number of flutes

* Prices are expressed in EURO and do not include VAT.

Quantity Discount: -5% (6 - 15 buc) ;-10% (16 - 25 buc) ;-15% (≥26 buc) ;
Code D1 D2 L1 L2 Price without VAT
[EURO] 		Price without VAT
Discount 5%
(6-15 buc)
[EURO] 		Price without VAT
Discount 10%
(16-25 buc)
[EURO] 		Price without VAT
Discount 15%
(≥26 buc)
[EURO]
0078456 6.0 6.0 54.0 10.0 30.46 28.94 27.41 25.89  
0078456A 6.0 6.0 57.0 13.0 38.08 36.18 34.27 32.37  
0078458 8.0 8.0 58.0 12.0 44.50 42.28 40.05 37.83  
0078458A 8.0 8.0 63.0 19.0 49.56 47.08 44.60 42.13  
0078460 10.0 10.0 66.0 14.0 55.97 53.17 50.37 47.57  
0078460A 10.0 10.0 72.0 22.0 76.17 72.36 68.55 64.74  
0078460B 12.0 12.0 73.0 16.0 81.36 77.29 73.22 69.16  
0078460C 12.0 12.0 83.0 26.0 96.47 91.65 86.82 82.00